Shop

Home Components Network RealTek Networking Realtek – RTL8139C 10/100 PCI Ethernet Adapter

Realtek – RTL8139C 10/100 PCI Ethernet Adapter

$5.77

Realtek 10/100 PCI Ethernet Adapter – RTL8139C

Only 1 left in stock

SKU: RealTek-RTL8139C Categories: , ,

Description

This is a used Network Card RTL8139C in good working condition.

Features
  • 128 pin QFP/LQFP (pin-to-pin compatible with the RTL8139C(L))
  • Software compatible to the RTL8139 series when configured in RTL8139C mode (C mode) Supports descriptor-based buffer management when configured in RTL8139C+ mode (C+ mode)
  • Supports IEEE802.1Q VLAN tagging in C+ mode
  • Supports Transmit (Tx) Priority Queue for QoS, CoS applications in C+ mode
  • Integrated Fast Ethernet MA C, PHY and transceiver in one chip
  • 10Mbps and 100Mbps operation
  • Supports 10Mbps and 100Mbps N-way Auto-negotiation operation
  • PCI local bus single-chip Fast Ethernet controller
    • Compliant to PCI Revision 2.2
    • Supports PCI clocks 16.75MHz-40MHz
    • Supports PCI target fast back-to-back transaction
    • Supports Memory Read Line, Memory Read Multiple, Memory Write and Invalidate, and Dual Address Cycle, when set to C+ mode.
    • Provides PCI bus master data transfers and PCI memory space or I/O space mapped data transfers of the RTL8139C(L)+’s operational registers
    • Supports PCI VPD (Vital Product Data)
    • Supports ACPI, PCI power management
    • Supports optional PCI multi-function with additional function in slave mode only.
  • Supports CardBus. The CIS can be stored in the 93C56 or expansion ROM
  • Supports either MII or Boot ROM interface, though only one interface can be implemented at a time. Up to 128K byte Boot ROM interface for both EPROM and Flash memory can be supported
  • Supports 25MHz crystal or 25MHz OSC as the internal clock source. The frequency deviation of either crystal or OSC must be within 50 PPM
  • Compliant to PC99 and PC2001 standards
  • Supports Wake-On-LAN function and remote wake-up (Magic Packet*, LinkChg and Microsoft wake-up frame)
  • Supports 4 Wake-On-LAN (WOL) signals (active high, active low, positive pulse, and negative pulse)
  • Supports auxiliary power-on internal reset, to be ready for remote wake-up when main power still remains off
  • Supports auxiliary power auto-detect, and sets the related capability of power management registers in PCI configuration space
  • Includes a programmable, PCI burst size and early Tx/Rx threshold
  • Supports a 32-bit general-purpose timer with the external PCI clock as clock source, to generate timer-interrupt
  • Contains two large (2Kbyte) independent receive (Rx) and transmit (Tx) FIFOs
  • Advanced power saving mode when LAN function or wakeup function is not used
  • Uses 93C46 (64*16-bit EEPROM) or 93C56 (128*16-bit EEPROM) to store resource configuration, ID parameter, and VPD data. The 93C56 can also be used to store the CIS data structure for the CardBus application
  • Supports LED pins for various network activity indications
  • Supports digital and analog loopback capability on both ports
  • Half/Full duplex capability
  • Supports Full Duplex Flow Control (IEEE 802.3x)
  • 3.3V power supply with 5V tolerant I/Os

* Third-party brands and names are the property of their respective owners.

 

 
       

Additional information

Weight 0.400 lbs
Dimensions 5.000 × 4.750 × 0.750 in
latest

Manufacturer

Condition